User manual · Objects & Properties
Envelope Follower
The Envelope Follower uses an audio signal to modulate parameters for each entity that is connected to it via a Modulator Link. The Envelope Follower receives its audio signal from one or more Mics via Delay Lines. In the Object Palette and the Mode menu it is called Env Follower.
Video tutorial · 1:00
Envelope Follower Properties#
- Mode: The specific type of behavior used for this Modulator. Each type has its own parameters and effects.
- Depth: Scales the Modulator's output before it reaches its targets. See Modulator Properties.
Parameters#
The follower has a second Mode drop-down of its own, under the Parameters heading.
- Mode: Signed smooths the input signal as it is, Peak smooths its absolute value, and Pass-Through outputs each input sample directly with no smoothing. Peak tracks the signal's actual level: with equal Attack and Release it follows the average level, and with a very short Attack it follows the peaks. A new Envelope Follower uses Peak. Signed is how Envelope Followers worked before the modes existed, and presets made then keep it, so they sound the same; its output depends more on the Attack and Release times than on how loud the signal is. Pass-Through turns the audio itself into a modulation signal, for audio-rate effects.
- Gain: The gain applied to the input signal before it drives the Envelope Follower, in dB. Raise it so a quiet Mic can drive the full range without making the Mic itself louder.
- Delay: The duration for which the input signal will be delayed before driving the Envelope Follower. Useful for time-aligning the follower's output with other audio paths.
In Signed and Peak Modes#
- Attack: How long the output takes to rise to match the input when the input gets louder.
- Release: The approximate amount of time the Envelope Follower's output takes to decrease to match an input signal if the input signal stayed the same for long enough. Note that for most use cases, this should be longer than the attack time, or else the Envelope Follower will only produce extremely transient output signals. On the other hand, extremely short attack or release may be useful for frequency-modulation-type techniques (or similar).
In Pass-Through Mode#
- Monopole: Maps the Pass-Through output from its bipolar range of -Depth to +Depth onto the range 0 to +Depth.